ASURO USB DRIVER DOWNLOAD

Right motor direction Forward: Turn the Asuro robot on just before pressing the upload button in the Arduino environment. If it doesn’t work, try switching the wires that go to pins 0 and 1 on the Arduino board. Follow the instructions in the Asuro manual which is also on the CD that comes with the Asuro. Replacing the ATmega8 The ATmega8 that comes with the Asuro robot uses an undocumented protocol to upload programs and is locked so you can’t change it, meaning you couldn’t use Arduino to upload programs to it. Fortunately, you can use the ATmega8 from any Arduino board instead. Arduino on other Chips.

Uploader: Mekus
Date Added: 14 January 2013
File Size: 15.19 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 44193
Price: Free* [*Free Regsitration Required]

Sources for Electronic Parts.

This Asuro wiki in German has more information. The normal serial commands from the reference should work.

AREXX ENGINEERING

You need to solder a couple of extra wires onto the Asuro to program it. If it doesn’t work, try switching the wires that go to pins 0 and 1 on the Arduino board. For asuo info pleae look at this Forum Post. The other wire goes to ground on the Arduino board. Front button detection Checking the front buttons is made by sending voltage from digital out 3, and reading analogue in 4.

Related Drivers  HP C8111A PRINTER DRIVER DOWNLOAD

Because the ATmega8 is in the Asuro, not the Arduino board, you need to use the switch on the robot instead of the reset button on the board. Replacing the ATmega8 The ATmega8 that comes with the Asuro robot uses an undocumented protocol to upload asuuro and is locked so you can’t change it, meaning you couldn’t use Arduino to upload programs to it.

ASURO USB adapter

Board Setup and Configuration. Related Hardware and Initiatives.

Changing Arduino Preferences Since the Asuro robot runs at half the speed of the Arduino board 8 MHz instead of 16 MHzyou’ll need to change a couple of files in your Arduino preferences file you may want to make a backup of the original file first: Turn the Asuro robot on just before pressing the upload button in the Arduino environment. Connect the wires to the right pins. Since the Asuro robot runs at half the speed of the Arduino board 8 MHz instead of 16 MHzyou’ll need to change a couple of files in your Arduino preferences file you may want to make a backup of the original file first:.

Arduino on other Chips.

Asuro DIY USB IR Transceiver – video dailymotion

Depending on asurk button s that are uxb, different resistors are connected on the asuro PCB and an unique analogue signal will return to analogue in 4, defining the buttons pressed.

Related Drivers  M863G MOTHERBOARD AUDIO DRIVER DOWNLOAD

Odometric speed control Odometric infrared LED: You can upload programs straight from the Arduino environment. Connect the USB cable to the Arduino board and the computer. Checkout the Asurino page for further information. Fortunately, you can use the ATmega8 from any Arduino board instead. Follow the instructions in the Asuro manual which is also on the CD that comes with the Asuro.

Pop the ATmega8 out of an Arduino board and place it in assuro Asuro make sure it’s the right way around. Arduino sketch for simple controls: An Arduino library and a modified bootloader is also available, based on these sketch.

Asuro / Yeti USB IR Transceiver

The playground is a publicly-editable wiki about Arduino. Take the ATmega8 out of the Asuro keep it around, because it’s programmed with a useful self-test. The ATmega8 that comes with the Asuro robot uses an undocumented protocol to upload programs and is locked so you can’t change it, meaning you couldn’t use Arduino to upload programs to it.

Right motor direction Forward: